-40%
(20) Red Head Concrete/Block/Brick Sleeve Anchor #11018, 1/2
(20) Red Head Concrete/Block/Brick Sleeve Anchor #11018, 1/2
(20) Red Head Concrete/Block/Brick Sleeve Anchor #11018, 1/2
(20) Red Head Concrete/Block/Brick Sleeve Anchor #11018, 1/2

(20) Red Head Concrete/Block/Brick Sleeve Anchor #11018, 1/2" x 4", Zinc Steel

$ 9.5

Availability: 78 in stock
  • Type: Sleeve Anchor
  • Head Style: Hex Nut
  • Item Length: 4 in
  • Material: Steel, Zinc
  • Number in Pack: 50
  • System of Measurement: Inch
  • Country/Region of Manufacture: China
  • Condition: New
  • Thread Size: 3/8 in
  • UPC: 092097110182
  • Brand: RedHead
  • MPN: 11018

    Description

    If you have any questions please ask me. Thank you.
    (20) Red Head Heavy Duty Concrete/Block/Brick Sleeve Anchor #11018, 1/2" x 4", Zinc Steel
    You get 2 boxes. 10 anchors in each box. Box containers may not be perfect.
    Use 1/2" Size Carbide Drill Bit
    Minimum Anchor 1-7/8"
    Tightening Torque 20 ft. lbs.
    Building Code Approved
    Usage Steps:
    1. Drill 1/4" Deeper Than Anchor Embedment.
    2. Clean By Blowing Out The Hole With Air
    3. Drive The Anchor With Drill Driver
    4. Tighten Two to Three Times With Wrench
    Technical Specifications
    Sleeve Anchor
    Hex Nut
    Head Style
    Anchor Material Steel
    Zinc Plated
    Diameter 1/2 in
    Thread Size 3/8-16
    Length 4 in
    Maximum Work Thickness 2 1/8 in
    ICC Approved for Un-Cracked Concrete
    Minimum Embedment 1 7/8 in
    Ultimate Shear in 4000 PSI Concrete (Lb.) 5,000
    Ultimate Tension in 4000 PSI Concrete (Lb.) 4,400
    Meets/Exceeds A-A-1923A