Concrete Sleeve Anchor Zinc Plated 5/16" x 3 1/2” Simpson Strong-Tie 2 Pack 100

Description

2 Lot - Sleeve Anchors Simpson Strong-Tie SL31312PF Sleeve-All Anchor 5/16" x 3 1/2” Flat
Zinc Plated 50/Pack 2 Pack 100 Altogether
In addition, we will add related product Free/Bonus
Simpson Strong Tie - 1/4” x 2 1/4” Sleeve Anchor (4) With 1/4” x 4” Drill Bit Included
Simpson Strong Tie - 3/8" x 6" Sleeve Anchor  1 pack 10 per pack included
Simpson Strong Tie -1/4" x 1 3/4"  Concrete Sleeve Anchor 10 pack 2 per pack 20 included
Simpson Strong Tie –
3/16” x 1 3/4” Concrete Screws 1 pack 20 per pack  included
To look at more option ( Free/Bonus related product ) for that listing
Please go to KOL Business Group Store or copy the link
https://www.ebay.com/str/KOL-Business-Group?_trksid=p2047675.l2563
Shipping   -   Handling 1 Day   Transit 2-3 Days
Sleeve-All® Sleeve Anchor
Sleeve-All
®
expanding anchors are pre-assembled, expanding sleeve anchors for use in all types of solid base materials. This anchor is available in acorn, hex, rod coupler, flat or round head style for a wide range of applications.
Material
Carbon steel or stainless steel
Finish
Carbon steel anchors are zinc-plated
Installation
1.
Drill a hole in the base material using a carbide drill bit the same diameter as the nominal diameter of the anchor to be installed.
2.
Drill the hole to the specified embedment depth, and blow it clean using compressed air. (Overhead installations need not be blown clean.) Alternatively, drill the hole deep enough to accommodate embedment depth and the dust from drilling.
3.
Place the anchor in the fixture, and drive it into the hole until the washer and nut are tight against the fixture.
4.
Tighten to required installation torque.
Caution
Oversized holes will make it difficult to set the anchor and will reduce the anchor’s load capacity