ONO SOKKI - LV-1610 Laser Doppler Vibrometer

Description

ONO SOKKI - LV-1610 Laser Doppler Vibrometer
Unit powers on but we could not do any further test for it, and it needs repair or calibration to function.
Item was set to AC100V , and you need to change the voltage setting or need to connect with a voltage adapter .
You are bidding on only what is listed in the description and what is in the pictures, if it is not listed in the description and you don't see it in the pictures, then it is not included. Power cords and power adapters are never included unless specifically mentioned
The LV-1610 laser doppler vibrometer uses an interferometer system which is built in its sensor head.
By receiving the reflective light from a measurement object directly at the interferometer section, measurement can be performed without a reflection marker even on such an object like black rubber having a low reflection rate at its surface.
Specifications
Sensitivity
Range
Frequency range
Velocity range
10 m/s (max)
1 m/s/V
±10 V
1 Hz to 1.5 MHz
1 m/s (max)
0.1 m/s/V
±10 V
1 Hz to 1.5 MHz
0.1 m/s (max)
0.01 m/s/V
±10 V
1 Hz to 1.5 MHz
Acceleration range
10
2
m/s
2
(max)
10
1
m/s
2
/V
±10 V
1 Hz to 2 kHz
10
4
m/s
2
(max)
10
3
m/s
2
/V
±10 V
1 Hz to 20 kHz
10
6
m/s
2
(max)
10
5
m/s
2
/V
±10 V
200 Hz to 100 kHz
Displacement
10
2
m/s (max)
10
3
m/V
±10 V
1 Hz to 5 kHz
10
4
m/s (max)
10
5
m/V
±10 V
20 Hz to 40 kHz
10
6
m/s (max)
-
±10 V
2 kHz to 200 Hz
Filters
high pass
OFF / 100 Hz / 1 kHz, selectable
low pass
10 kHz / 100 kHz / OFF, selectable
Output impedance
50 Ω or less
Measurement distance
5 to 340mm (standard)
Laser spot size
approx. 20 to 400 μm
Light source
He-Ne laser (λ = 632.8nm)
Laser output power
2mW max. (Class 3B)
Signal cable
5 m
Operating temperature
0 to +40°C
Power supply
100/120/220/240 VAC, approx. 75VA
Outer dimensions
sensor head
60 (W) x 51 (H)  x 168 (L) mm
main unit
420 (W) x 149 (H) x 569 (D) mm