Sharpening Sled honing guide model #SS1

Description

AS SEEN IN SHOPNOTES
®
MAGAZINE!
ALSO SEEN IN FINE WOODWORKING
®,
WOODWORKER'S, WOODTURNER'S MAGAZINE, (UK), FARM SHOW
® & WOODSMITH!
.00 SHIPPING! (USA ONLY)
The
Model #SS1
(SEE FIRST PICTURE) is able to straddle stones up to 1 inch thick and 3 inches wide. Hone blades up to 1/4 inch thick and 2 5/8 inches wide. Positive stop detents for setting your bevel angle from 15 to 45 degrees. An alignment slide helps ensure a square blade edge . .99
ONLY ONE SHARPENING SLED™, THE MODEL SS1 IS INCLUDED IN THIS SALE. THE OTHER MODELS SHOWN IN THE SECOND PICTURE IS TO SHOW SIZE COMPARISON BETWEEN OUR MODELS
Our flagship product!
Alisam's
"Sharpening Sled
™
"
.
The easiest, fastest, most precise way to hand sharpen/hone your chisels, handplane and scraper plane blades*!
Purchase online!
"Of all the [honing] guides I tried, this one was the most comfortable to use!" -    Woodsmith Vol. 32 /No. 187
Made of sturdy anodized aluminum!
*Depending on model
Four easy steps!
1) Loosen black handles and set your desired bevel angle using the precise, laser engraved index marks. Tighten handles.
2) Place the guide over your sharpening stone.
3) Insert blade, push alignment "slide" up against the side of  the blade  to ensure a square edge.
4) Tighten brass toggle foot clamp to secure blade and away you go!
The easiest to use sharpening/honing guide on the market!
*No measuring blade protrusion!
*No extra angle setup jigs to use!
-loosen locking knobs and select your angle
-angle set positively with mating detents
-primary
OR
micro bevel
*No unstable "unicycle" guides!
- 4 sealed radial bearings for rollers
-front bearings are spring loaded for a .010 inch "give"
-no rounding of blade corners
-no inaccurate blade angles
-
Finally! Use the full length of stones!
-sharpen twice as fast
*Blade easily aligned perpendicular!
-not "by eye" but with a NEW alignment "slide"
-perfectly square blades
*Use with up to
4
inch wide stones, any length
(depending on model chosen).
Our satisfied customers respond!
"You have solved one of the final problems encountered with all preceding jigs, primarily, setting the angle with out any additional device or jig. From the Veritas to Richard Kell's jigs, your device has that final problem solved."
Boone, IA
"A brilliant design based on the traditional Japanese
method of plane blade sharpening."
Benton, PA
"I have to say that this is a real nice piece of engineering. It's a substantial piece with good ergonomics."
Philadelphia, PA
Powered by
eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.