Split Drive Concrete Anchor 1/4" x 2-1/2" Mushroom Simpson Strong-Tie P/100

Description

Simpson Strong-Tie Split Drive Anchor 1/4" x 2-1/2" Mushroom Head Zinc-
Plated MSD25212 (100 per Pack )
In addition, we will add related product
Free/Bonus
Simpson Strong Tie -  14" x 1 3/4" Sleeve Anchor 5 pack 2 per pack 10 included
Simpson Strong Tie - 1/4” x 2 1/4” Sleeve Anchor (4) With 1/4” x 4” Drill Bit Included
Simpson Strong Tie - 3/8" x 2 3/4"   Sleeve Anchor 5 pack 2 per pack 10 included
To look at more option ( Free/Bonus related product ) for that listing
Please go to KOL Business Group Store or copy the link
https://www.ebay.com/str/KOL-Business-Group?_trksid=p2047675.l2563
Shipping   -   Handling 1 Day   Transit 2-3 Days
CSD/DSD Split-Drive Anchors
The Split-Drive anchor is a one-piece expansion anchor that can be installed in concrete, grout-filled block and stone. As the anchor is driven in, the split-type expansion mechanism on the working end compresses and exerts force against the walls of the hole.
Key Features
·
Available in countersunk (CSD) and duplex-head (DSD) styles
·
DSD anchor can be removed with a claw hammer for temporary applications
Material
Carbon steel
Finish
Zinc-plated; mechanically galvanized
Installation
1.
Drill a hole in base material using a 1/4"-diameter carbide-tipped drill. Drill hole to specified embedment depth and blow clean using compressed air. (Overhead installation need not be blown clean.) Alternatively, drill hole deep enough to accommodate embedment depth and dust from drilling. Position fixture and insert split-drive anchor through fixture hole.
2.
For CSD, 3/8" diameter fixture hole is recommended for hard fixtures such as steel. For DSD, 5/16"-diameter fixture hole is recommended.
3.
Drive anchor until head is flush against fixture.
Caution
Oversized holes in the base material will greatly reduce the anchor’s load capacity. For CSD, embedment depths greater than 1 1/2" may cause bending during installation.
Warning
(CSD only): Industry studies show that hardened fasteners can experience performance problems in wet or corrosive environments. Accordingly, use these products in dry, interior and non-corrosive environments only.
Product Notes
·
Mechanical galvanizing meets ASTM B695, Class 55, Type 1. Intended for some pressure-treated wood sill plate applications. Not for use in other corrosive or outdoor environments. See Technical Notes for corrosion information.